/*** DIM PLANES TABLE for different profiles and dimensions ***/
//Value: -1.0: applies for all profiles regardless of dimension!

//1 = I profile 
//2 = L profile 
//3 = Z profile 
//4 = U profile 
//5 = plate 
//6 = round bar 
//7 = round tube 
//8 = square pipe 
//9 = C profile 
//10 = T profile 
//15 = ZZ profile 
//16 = CC profile 
//17 = CW profile 
//51 = polygon_plate


/***                    FLANGE                               WEB       
ProfType,MaxDim, middle,right, left,                  middle,right, left,
=================================================================
***/

// I-Profiles - t/m 300mm from outside of the profile, the rest from the hart
//1,       300.0,   FALSE, TRUE*, TRUE,       FALSE,  TRUE*,  TRUE
// outside profile
//1,        -1.0,    TRUE*, FALSE, FALSE        TRUE*, FALSE, FALSE
//center to profile
1,        -1.0,    TRUE*, FALSE, FALSE        FALSE, TRUE*, FALSE

// L-Profiles - always from the outside
2,        -1.0,    FALSE, TRUE*, TRUE,        FALSE,  TRUE*,  TRUE

// U-Profiles - always from the outside
4,        -1.0,   FALSE,  TRUE*, FALSE,       FALSE,  TRUE*,  TRUE

// Plates - Timber - always from the outside
//5,        -1.0,   FALSE,  FALSE, FALSE,      FALSE,  FALSE, FALSE
//5,        -1.0,   TRUE,  FALSE, FALSE,        TRUE,  FALSE, FALSE
5,        -1.0,   FALSE,  TRUE,  TRUE*,      FALSE,   FALSE,  TRUE*

// Solid round rond - always from the center
6,        -1.0,   TRUE*,  FALSE,  FALSE,      TRUE*,   FALSE,   FALSE

// Tubes - always from the hart 
7,        -1.0,   TRUE*,  FALSE,  FALSE,      TRUE*,   FALSE,   FALSE

// Box girders - always from the outside
//8,        -1.0,   TRUE*,  FALSE,  FALSE,      TRUE*,   FALSE,   FALSE
8,        -1.0,   FALSE,  TRUE*, TRUE,        FALSE,  TRUE*,  TRUE

// C-profile - horizontal dimensioning from web's outer edge, vertical dimensioning from top flange
9,        -1.0,   FALSE,  TRUE, FALSE,      FALSE,   FALSE,  TRUE

// T-profile - horizontal dimensioning from the middle of the web, vertical dimensioning from top of flange
10,       -1.0,  TRUE*, FALSE, FALSE,      FALSE,   FALSE,  TRUE*

// Contour plates
//51,       -1.0,   FALSE,  FALSE,  FALSE,      FALSE,   FALSE,  FALSE